Meter ThermoPro Jumbo + Sensor Wireless Indoor/Outdoor Meter Temp/Humidity

ThermoPro Jumbo + sensor Indoor/Outdoor Wireless hygrometer

Allows you to check the temperature and humidity in up to 3 different remote locations (with extra sensors) This unit has a sleek design with a jumbo display unit to show temperature and humidity readings precisely. The indoor-outdoor temperature monitor has a handy flip-out stand for a desktop or hung on a wall. It comes with one remote sensor, which has an operating range of up to 60 metres (line of sight), and has weather seal for outdoor placement.  Switchable °C/°F.

Suitable for measuring temperature and humidity inside and outside with sensor included see below:

• Inside roof spaces for insulation installer

• Monitoring humidity levels for dehumidifiers

• Underfloor and in A/C ducts for humidity and moisture monitoring

• Cool room monitoring can be measured using the included sensor.

• Ski Lodges indoor/outdoor temp monitoring for guests

• Reptile enclosure Hum/Temp monitoring

• Plant Nurseries etc (not wet areas)

Wireless Indoor/Outdoor ThermoPro-Hygrometer:
Product description
Features:
1.The bold, easy-to-read LCD screen displays the current indoor outdoor temperature and humidity percentages.
2. With a temperature and humidity percentages trend indicator arrow and daily high and low information.
3.Display stands upright for tabletop use or is wall-mountable.
4. Includes 24 hours high and low records, for temperature and humidity.
5. You can simply reset the temperature and humidity.
NOTE - To Synchronize Remote Sensors up to 3
1.Position the remote sensor near the base station
2.Install batteries into transmitter and receiver and select a channel number for each transmitter.
3.The RF signal icon (located on the upper left of the base station display) will flash
4.Wait for a moment or press TX button in the outdoor transmitter
5.The remote sensor temperature/humidity will appear Each time the batteries (either base station or remote sensor) are replaced or base station/remote sensor lost connection,
make sure to follow the  synchronization process to pair and re-connect the base station and remote senor.

6. The base station (receiver) will cycle through the channels to display each sensor once paired and set

                         
Specifications
1. 433 Mhz transmission frequency.
2. Transmission range up to 200 ft. (range maybe shorter based on interference present).
3. Indoor Temperature range: (-20°C~70°C).
4. Outdoor Temperature range: (-50°C~70°C).
5. Humidity range: 10% ~ 99%.
6. Temperature tolerance: (+/- 1.1°C).
7. Humidity tolerance: ±2% from 30% to 80%; ±3% below 30% and above 80%

Size 
Base station unit (Receiver):2.6"(Length) x 3.1"(Height) x 1" (Width)
Remote sensor (Transmitter):2.4"(Length) x 2.5"(Height) x 0.78" (Width)
Package Contents: 
1 x base station unit (Receiver).
1 x remote sensor (Transmitter). can take up to 3 sensors
4 x AAA size batteries (included).

WARNING important points

• The remote unit should NOT be placed in direct sunlight this is not a fully weatherproof unit, it is weather sealed. 
• Otherwise,sunlight will heat up the remote sensor which leads to higher temperature reading than the air temperature which is supposed to be measured.
• The remote sensor must be always placed upwards so that rain won't get inside the sensor through the vent holes on the bottom of the senor, which functions to let the remote sensor detect the environmental temperature and humidity more precisely and quickly.